|
smiles77 (November 30, 1999 at 12:00 am)
d40 doesnt have CLS. good video tho.
chrissowa (November 30, 1999 at 12:00 am)
firmware update is not over pc, its over a d700 or d3
sovietspyguy (November 30, 1999 at 12:00 am)
Good video, informative and no extra garbage.
The way youtube ought to be. :)
Pizzscn (November 30, 1999 at 12:00 am)
the Bible. Great choice!
You should read Judges it's actually very funny
ChicoEdge (November 30, 1999 at 12:00 am)
Don't forget that the Nikon F6 (Nikon's greatest film camera) is also able to work with CLS. Check out the new SB900. The interface is much simpler and it can plug into a pc for firmware updates.
hobocamp (November 30, 1999 at 12:00 am)
Very nice, straight forward example. I was always confused as to whether using the popup flash in this case would contribute to the flash - thanks for explaining that!
jwischka (November 30, 1999 at 12:00 am)
The setup would be roughly the same. Essentially you would need to position the lights (as you suggest) and then set both SB-800's to "remote", and either let them fire in TTL mode or adjust the power individually in the on-camera settings. If you explain exactly what you're looking for, I can try to put something together.
jwischka (November 30, 1999 at 12:00 am)
There are different settings for this. In my example, the pop up flash fires to trigger the SB-800. However, you can have the on-board flash fire during the exposure as well. This can be adjusted in the camera flash menu where you set the SB-800 to fire in TTL mode.
0zgon (November 30, 1999 at 12:00 am)
I think the pop up flash does fire, but the shutter is not open when it fires, and the only purpose of it is to tell the SB-800 to fire. The shutter only opens when the SB-800 fired.
pannysat (November 30, 1999 at 12:00 am)
Can you do a video on a two flash setup, one a key light and the other a fill light, with umbrella?
thanks |